BLANCO BMS607W User Manual download pdf (Page 5)

5

Connecting to electricity

The manufacturer disclaims any

responsibility should these safety

instructions not be carried out.

The oven is designed to be connected to 240

V - 50 Hz electricity supply.

The oven has an easily accessible terminal

block which is market as follows.

Letter L Live terminal

Letter N Neutral terminal

Earth

The cable used (of the type H05 RR-F) must

have a min. cross section of 1.5 mm

2

.

In order to connect it to the oven it is

necessary to remove the hatch at the back of

the oven to reach the terminal block.

For direct connection to the mains supply a

two pole swich whith a minimum rating of

13 A and a minimum distance of 3 mm

between its contacts must be fitted between

the supply and appliance.

This swich must not break the yellow/green

earth cable at any point.

The appliance must be

earthed

Important

After installation and connecting, the cable

must be placed so that is cannot at any point

reach a temperature more than 50°C above

the ambient temperature. Before the

appliance is connected check that:

the main fuse and the domestic installation

can support the load;

the power supply is properly earthed;

the double pole swich used to connect the

appliance to the supply is easily accessible

after installation.

1 2 3 4 5 6 7 8 9 10 ... 22 23

Comments to this Manuals

No comments